Voting: Difference between revisions

From Help
No edit summary
No edit summary
 
(30 intermediate revisions by 2 users not shown)
Line 2: Line 2:
== Home ==
== Home ==


# TB/GA/Board decision tool<br /> 1.1 https://portal.etsi.org/webapp/tbdecision3/Menu.asp


Who can vote?
The Decision Support Application is designed to help the ETSI Groups with their decision making processes. It has predefined types of decisions for


In a Technical Body:
* approving a draft,
* selecting an option,
* electing officials
* ordinary decisions.


* For a vote during a meeting, clauses 1.7.1 and 1.7.1.1 of the Technical Working Procedures (TWP) apply.
Each type has been defined in accordance with the [https://portal.etsi.org/Resources/ETSI-Directives ETSI Rules of  Procedure] in terms of who can vote, calculation of results etc.).


* For a vote by correspondence, clauses 1.5.5, 1.7.1 and 1.7.1.2 of the TWP apply.
Each decision will normally have 3 phases


In an Industry Standardisation Group:  
Phase 1 - [https://help.etsi.org/index.php?title=Voting#Creating/Modifying Creating (also modifying, deleting or closing a vote]


ISGs basically follow the same rules as those laid down in TWP clause 1.7 for Technical Bodies However, rules for appointment of officials are those laid down in TWP clause 3.3. They are also authorized to deviate from the ETSI TWPs, as per clause 3.7, these potential deviations are specified in each ISG's respective Member Agreement.
Phase 2 - [https://help.etsi.org/index.php?title=Voting#Voting Voting]


For example, in its deviations an ISG may define its own vote calculation rules (non-weighted simple majority), or use presence to previous.
Phase 3 - [[Voting#Results|Results]]


In addition, you may be interested in Validating your voting rights




1.2 https://portal.etsi.org/webapp/tbdecision3/QueryformDb.asp?mode=CREATE
==Voting==


'''Technical body''': change name to "Group" in the field name and in the text below the drop-down button
==='''How to Vote'''===
a) Select '''IN PROGRESS''' from the menu.


b) Select the particular vote from the list. (Green indicates consensus gathering and Blue indicates votes.)


[[File:Sept2024.png|center|thumb|602x602px]]
'''Category'''


Remove "Type" from the User Interface and use only the terminology "Category". See figure below.


If you find you can't vote it may be because:.


[[File:Voting001.png|center|thumb|751x260px]]
1) There are currently no open votes in which you are allowed to participate.


2) The organization you  [[represent]]  does not have voting rights.


3) You are not [[correctly registered]] in the Membership List of the appropriate Group in case of vote by correspondence.


c) If you represent more than one organization, you will be able to select the appropriate organization from the list at the top of the screen. You will only be able to vote on behalf of ONE of these Organizations. If you represent more than one organization, but do not have the option to select the organization, or if the list is not complete, please contact the Technical Body Support Team


Category drop-down menu:
<ins>https://portal.etsi.org/People/Commitee-Support-Staff</ins>


* in last option "Vote for draft TS, TR, ES, EG or GS", add GR
d) Make your selection and click on the "Submit" button


* For consensus measuring ETSI uses the Remote Consensus application, so hide the 2 following options:
You may change your vote until the close of the voting period.


* '''Consensus measuring for Draft EN'''
If someone else from your organization has already voted, you will see who has voted and if the vote is not secret, you can also see how they voted.


* '''Consensus measuring for Draft TS, TR, ES or EG'''
You may, in exceptional circumstances, change the vote of another representative of your organization. However, it is strongly recommended that you contact the person first. If you change the vote of another person that person will be informed by email of your action.


==Voting rights==


'''Period''': for vote by correspondence delete the time zone printed on the right-hand side of the starting time and ending time (as shown on screen print below).
===Validating your voting rights.===
CONTENTS:  


*[[Who may vote]]
*[[How to check your rights]]
*[[How to register to a Technical Body Membership List]]




[[File:Voting002.png|center|thumb|527x58px]]


'''Who may vote'''


'''Time zone''':
See https://portal.etsi.org/webapp/tbdecision3/Menu.asp


* If it is easily achievable, delete the cities from the drop-down menu (since the indication is incorrect during summertime)<br />
'''How to check your rights'''


<gallery>
You first need a [[username and password.]]
File:Oct8.png
</gallery>


* If the change above is not easy,
For voting by correspondence in a Technical Body, open the [[TB Membership/Exploder Lists]] application.


o  When the vote is during the meeting, modify text to "Select the time zone where the meeting takes place<ins> - Select the number of hours by which the meeting time zone is ahead of or behind GMT (GMT+/- xx:xx) and ignore the indication of cities as this indication is only valid in winter time</ins>"
Step 1 check that you have (been) registered to the list.


o  when vote by correspondence is selected, replace "select the time zone where the meeting takes place" with "Vote by correspondence always uses the GMT[SC1] time zone"
The right side of the screen shows the email exploders lists to which you are registered. Technical Body Membership lists are highlighted. (<small>You may also subscribe to a list for email only. In this case the exploder list will not be shown on the screen and you will not have voting rights</small>.)


* Note:  a supplementary request is included in annex A, going beyond minimum necessary changes but which would enhance user friendliness. ITC is requested to consider it for a potential future enhancement and provide an initial quote.
If you don't see the list, follow the instructions for [[Registering to a Technical Body List]] below.


* for vote by correspondence, change the time zone to "GMT" (and not GMT+1)
Step 2 Check that your voting rights are correct.


Click on the name of the membership list. Search for your name or email address (Use the Browser "search" or "find"  functions). The last column shows your voting rights. If you have "No Voting Rights" check that your Organization and the Organization status is correct. If the organization is not correct or if you think the status is not correct, then email the membership cell at '''[[membership@etsi.org]]''' .


For voting in an Industry Specification Group, specific rules may apply according to the ISG agreement. To know your voting rights, contact the person supporting the ISG.


1.3 https://portal.etsi.org/webapp/tbdecision3/SelectEmail.asp


The TB/ISG email templates are outdated. If ITC can provide the file defining the rules to generate the email templates, SDC proposes to review them to be in line with Directives.
'''Registering''' to a Technical Body Membership List


note: SDC doesn't have access to all emails templates so it is difficult to comment and suggest changes.
Open the [[TB Membership/Exploder Lists]] application.


Select the Technical Body from the list on the left side of the page and click to view its email exploder lists.


1.4 Bug correction
Tick the list indicated as the Membership list and specify the email address(es) you would like this list to use.


When the user configures a vote and first selects a vote category which has the secret flag imposed as checked (ex: election 1st ballot) and then selects another category where the Secret flag can be manually set (ex: "Ordinary decision") the secret flag remains ticked and cannot be manually toggled.
Click the "Add me" button. The list owner will receive a message indicating that you wish to join the list.


==Creating/Modifying==
Officials (Chair and Vice Chair) and support staff are allowed to manage votes for their Groups: the "Create" and "Modify" options are visible to them.


2. Help files of TB decision tool
'''Modifying''' a vote configuration is no longer possible after the first vote has been cast. However, '''Deletion''' is still possible.


2.1 https://portal.etsi.org/webapp/TBDecision3/Help/help.asp
'''Who can vote'''? See https://portal.etsi.org/webapp/tbdecision3/Menu.asp
 
The Decision Support Application is designed to help the Technical Bodies with their decision making processes. It has predefined types of decisions for
 
* approving a draft,
* selecting option,
* electing officials
* ordinary decisions.
 
Each type has been defined in accordance with the [https://portal.etsi.org/Resources/ETSI-Directives ETSI Rules of  Procedure] in terms of who can vote, calculation of results etc.).
 
Each decision will normally have 3 phases
 
Phase 1 - [[Creating (also modifying, deleting or closing a vote]]
 
Phase 2 - [[Voting results|Voting]]
 
Phase 3 - [[Results]]
 
In addition, you may be interested in Validating your voting rights.
 
2.2 https://portal.etsi.org/webapp/TBDecision3/Help/creating.asp
== Creating/Modifying ==


=== Creation/Modification of a Decision. ===
'''CONTENTS:'''


* '''Technical Body'''
* '''Category'''
* '''Secret Vote Flag'''
* '''Subject'''
* '''Details/description'''
* '''Voting Period'''
* '''Document Location'''
* '''Candidates'''
* '''Email notification'''
Officials (Chair and Vice Chair) and support staff are allowed to manage votes for their Groups: the "Create" and "Modify" options are visible to them.


'''Modifying''' a vote configuration is no longer possible after the first vote has been cast. However, '''Deletion''' is still possible.
To create a vote, you provide the vote details in two consecutive screens. The first screen  displays the [[#Create_Vote_First_Screen|elements]] below. When satisfied with the details entered, click on the "'''Create'''" Button, and the [[#Create_Vote_Second_Screen|second screen]] will be displayed.


Select the '''group''' available to you from the list proposed in the "Group" field. Note that after creation of the procedure, the Group can no longer be modified. However, deletion is still possible.
<span id="Create_Vote_First_Screen"></span>
=== Body ===
Select the '''body''' available to you from the list proposed in the "Technical Body" field. Note that after creation of the procedure, the Body can no longer be modified. However, deletion is still possible.


=== Category===


The following predefined <span id="Categories"></span> '''Categories''' of decision are supported by the application ([[Details of Categories]]).


'''Who can vote'''? See https://portal.etsi.org/webapp/tbdecision3/Menu.asp
*'''Election 1st Ballot'''
 
*'''Election 2nd Ballot with 2 Candidates'''
The following predefined '''Categories''' of decision are supported by the application ([[Details of Categories]]).
*'''Election 2nd Ballot with more than 2 Candidates'''
 
*'''Election 3rd Ballot'''
* '''Election 1st Ballot'''
*'''Vote on Draft EN'''
* '''Election 2nd Ballot with 2 Candidates'''
*'''Vote on Draft TS, TR, ES, EG, GR or GS'''
* '''Election 2nd Ballot with more than 2 Candidates'''
*'''Selection of an option'''
* '''Election 3rd Ballot'''
*'''Ordinary decision'''
* '''Vote on Draft EN'''
* '''Vote on Draft TS, TR, ES, EG, GR or GS'''
* '''Selection of an option'''
* '''Ordinary decision'''


Once the vote has been created, the Category may not be modified any longer, however deletion is still possible.
Once the vote has been created, the Category may not be modified any longer, however deletion is still possible.
Line 150: Line 129:


For several categories this choice is imposed by the application (following ETSI Directives). For others, the '''Secret''' flag may be toggled manually.
For several categories this choice is imposed by the application (following ETSI Directives). For others, the '''Secret''' flag may be toggled manually.


The outcome (e.g.draft approved/not approved,) and the percentage of votes will always be available on closure of a decision process.
The outcome (e.g.draft approved/not approved,) and the percentage of votes will always be available on closure of a decision process.


===Subject===
The '''Title''' must clearly identify the decision to be taken (e.g.
The '''Title''' must clearly identify the decision to be taken (e.g.
* Approval of DTS/CYBER-0014 (TS 103 486) final draft v0.05 for publication
*Approval of DTS/CYBER-0014 (TS 103 486) final draft v0.05 for publication
* Election of a vice chair-Chairman for ISG NFV Working Group IFA
* Election of a vice chair-Chairman for ISG NFV Working Group IFA
The '''Description  or details''' can add additional information if required. '''''"Before voting, a clear definition of the issues shall be provided by the chair" [ETSI TWP]'''''  
The '''Details''' can add additional information if required. '''''"Before voting, a clear definition of the issues shall be provided by the chair" [ETSI TWP]'''''


===Voting Period===
The '''Voting period''' must be defined.  
The '''Voting period''' must be defined.  


For a vote by correspondence, the vote will be opened from 00:00:01 GMT on the starting date.
For a vote by correspondence, the vote will be opened from 00:00:01 GMT on the starting date.
Line 168: Line 145:
It will close at midnight GMT on the closing date.
It will close at midnight GMT on the closing date.


For a vote during a meeting, select the number of hours by which the meeting time zone is ahead of or behind GMT (GMT+/-xx:xx)
For a vote during a meeting, select the number of hours by which the meeting time zone is ahead of or behind GMT (GMT+/-xx:xx)  


* Officials and others who have rights to manage votes, may also close a vote manually at any time before the end date and time specified at the creation time.
*Officials and others who have rights to manage votes, may also close a vote manually at any time before the end date and time specified at the creation time.
* If the start date is configured in the past, the vote will start immediately after being created.
*If the start date is configured in the past, the vote will start immediately after being created.
THEN
 
When satisfied with the details entered, click on the "Create" Button
 
On the next screen you will find:


When satisfied with the details entered, click on the "'''Create'''" Button


On the <span id="Create_Vote_Second_Screen"></span> next screen you will find the elements below.


=== Document Location ===
The '''Document Location''' which may be used to provide a hyperlink to a copy of the draft for approval, the CVs of the candidates etc. It may be a word document, zipped file, HTML page other file type, or a folder. This field is optional and may remain blank.
The '''Document Location''' which may be used to provide a hyperlink to a copy of the draft for approval, the CVs of the candidates etc. It may be a word document, zipped file, HTML page other file type, or a folder. This field is optional and may remain blank.


=== Candidates ===
In the case of an election or selection of a technology , the '''Candidates''' or options  must be specified. Enter each one, then use the "Add" button to create another. The option to "abstain" will be added automatically.
In the case of an election or selection of a technology , the '''Candidates''' or options  must be specified. Enter each one, then use the "Add" button to create another. The option to "abstain" will be added automatically.


In the case of an approval of a draft, the options "yes", "no" and "abstain" will be automatically created.
In the case of an approval of a draft, the options "yes", "no" and "abstain" will be automatically created.


Near the bottom of this screen is a link to the '''Membership list''' of the Group concerned. This is the list of people who have voting rights when it is a vote by Technical Body for a vote by correspondence. If a person is not in the list, or if the last column says "No voting rights" they will not be able to vote for a vote by correspondence. People representing Full and Associate Member Organizations may get voting rights via the <u>[[TB Membership Lists]]</u> application.
Near the bottom of this second screen is a link to the '''Membership list''' of the Group concerned. This is the list of people who have voting rights when it is a vote by Technical Body for a vote by correspondence. If a person is not in the list, or if the last column says "No voting rights" they will not be able to vote for a vote by correspondence. People representing Full and Associate Member Organizations may get voting rights via the <u>[[TB Membership Lists]]</u> application.


For vote during a meeting, the list of all Full and Associate members voting weights applies.
For vote during a meeting, the list of all Full and Associate members voting weights applies.
Line 194: Line 170:
Click on the Accept button when ready.
Click on the Accept button when ready.


A summary of the details you have entered will be displayed. Click on the confirm button to create the vote.
=== Vote details ===
A summary of the details you have entered will be displayed. You can then click on Next to optionally send an email.
 
=== Send an email ===


Templates for '''email''' notification to inform the group exploder list will be created in the application. You may access it by clicking on the NOTIFICATIONS menu.
Templates for '''email''' notification to inform the group exploder list will be created in the application. You may access it by clicking on the NOTIFICATIONS menu.


The possible actions on a pre-configured notification email are:
The possible actions on a pre-configured notification email are:  


* Delete
*Delete
* Update
*Update
* Send
* Send


The "Notifications" menu option provides links to all notifications which have not been deleted or sent.
The "Notifications" menu option provides links to all notifications which have not been deleted or sent.




Line 211: Line 191:
[[Close a vote]]
[[Close a vote]]


[[NotificationDelete a vote|Notification]]
[[Notification]]
 
[[NotificationDelete a vote|Delete a vote]]
 
2.3 https://portal.etsi.org/webapp/TBDecision3/Help/rights.asp
 
== Voting rights ==
 
=== Validating your voting rights. ===
CONTENTS:
 
* [[Who may vote]]
* [[How to check your rights]]
* [[How to register to a Technical Body Membership List]]
 
'''Who may vote'''
 
 
 
See https://portal.etsi.org/webapp/tbdecision3/Menu.asp
 
 
 
'''How to check your rights'''
 
You first need a [[username and password.]]
 
For voting by correspondence in a Technical Body, open the [[TB Membership/Exploder Lists]] application.
 
Step 1 check that you have (been) registered to the list.<blockquote>The right side of the screen shows the email exploders lists to which you are registered. Technical Body Membership lists are highlighted. (<small>You may also subscribe to a list for email only. In this case the exploder list will not be shown on the screen and you will not have voting rights</small>.)
 
If you don't see the list, follow the instructions for [[Registering to a Technical Body List]] below.</blockquote>Step 2 Check that your voting rights are correct.<blockquote>Click on the name of the membership list. Search for your name or email address (Use the Browser "search" or "find"  functions). The last column shows your voting rights. If you have "No Voting Rights" check that your Organization and the Organization status is correct. If the organization is not correct or if you think the status is not correct, then email the membership cell at '''[[membership@etsi.org]]''' .</blockquote>[[For voting in an Industry Specificcation Group, specific rules may apply according to the ISG agreement. To know your voting rights, contact the person supporting the ISG.]]
 
 
 
'''Registering''' to a Technical Body Membership List
 
Open the [[TB Membership/Exploder Lists]] application.
 
Select the Technical Body from the list on the left side of the page and click to view its email exploder lists.
 
Tick the list indicated as the Membership list and specify the email address(es) you would like this list to use.
 
Click the "Add me" button. The list owner will receive a message indicating that you wish to join the list.
 
2.4 https://portal.etsi.org/webapp/TBDecision3/Help/voting.asp
 
== Voting ==
 
=== '''How to Vote''' ===
a) Select '''IN PROGRESS''' from the menu.
 
b) Select the particular vote from the list. (Green indicates consensus gathering and Blue indicates votes.)
 
If you find you can't vote it may be because:.<blockquote>1) There are currently no open votes in which you are allowed to participate.
 
2) The organization you  [[represent]]  does not have voting rights.
 
3) You are not [[correctly registered]] in the Membership List of the appropriate Group in case of vote by correspondence.</blockquote>c) If you represent more than one organization, you will be able to select the appropriate organization from the list at the top of the screen. You will only be able to vote on behalf of ONE of these Organizations. If you represent more than one organization, but do not have the option to select the organization, or if the list is not complete, please contact the Technical Body Support Team
 
<ins>https://portal.etsi.org/People/Commitee-Support-Staff</ins>
 
d) Make your selection and click on the "Submit" button
 
You may change your vote until the close of the voting period.
 
If someone else from your organization has already voted, you will see who has voted and if the vote is not secret, you can also see how they voted.
 
You may, in exceptional circumstances, change the vote of another representative of your organization. However, it is strongly recommended that you contact the person first. If you change the vote of another person that person will be informed by email of your action.


2.5 https://portal.etsi.org/webapp/TBDecision3/Help/Notification.asp
[[Delete a vote]]


== Notification ==
==Notification==
 
=== Notification ===
When a vote is created or closed, an email template is created. It is addressed to the exploder list for the Group concerned and provides the details including a link to the voting form or results page as appropriate.
When a vote is created or closed, an email template is created. It is addressed to the exploder list for the Group concerned and provides the details including a link to the voting form or results page as appropriate.


Line 293: Line 203:


The "Notifications" menu item provides access to all notifications which have not been sent or deleted.
The "Notifications" menu item provides access to all notifications which have not been sent or deleted.
== Results==


2.6 https://portal.etsi.org/webapp/TBDecision3/Help/Results.asp
===Viewing the Results===
== Results ==
 
=== Viewing the Results ===
'''CONTENTS'''
'''CONTENTS'''


* '''[[The outcomeThe percentageIndividual votesComments|The outcome]]'''
*'''[[The outcomeThe percentageIndividual votesComments|The outcome]]'''
* '''[[The outcomeThe percentageIndividual votesComments|The percentage]]'''
*'''[[The outcomeThe percentageIndividual votesComments|The percentage]]'''
* '''[[The outcomeThe percentageIndividual votesComments|Individual votes]]'''
*'''[[The outcomeThe percentageIndividual votesComments|Individual votes]]'''
* '''[[The outcomeThe percentageIndividual votesComments|Comments]]'''
*'''[[The outcomeThe percentageIndividual votesComments|Comments]]'''


All account holders have access to the results of all decisions. The results can be displayed in three levels of detail.
All account holders have access to the results of all decisions. The results can be displayed in three levels of detail.
Line 314: Line 222:


Results dissemination to the mailing list or during the meeting is manual.
Results dissemination to the mailing list or during the meeting is manual.
[https://portal.etsi.org/webapp/TBDecision3/Help/more.asp 2.7 https://portal.etsi.org/webapp/TBDecision3/Help/more.asp]
[https://portal.etsi.org/webapp/TBDecision3/Help/more.asp 2.7 https://portal.etsi.org/webapp/TBDecision3/Help/more.asp]


== Delete ==
==Delete ==


=== Deleting a vote ===
===Deleting a vote===
This is intended for use, only when the vote has been created in error.
This is intended for use, only when the vote has been created in error.


Line 329: Line 234:
Choose "Delete" from the menu. Select the vote to be deleted. Click on the "Delete" button.
Choose "Delete" from the menu. Select the vote to be deleted. Click on the "Delete" button.


==Categories==


 
[[File:Voting004.png|center|thumb|602x513px]]
2.8 https://portal.etsi.org/webapp/TBDecision3/Help/category.asp
 
<gallery>
File:Oct9.png
</gallery>
 




Line 346: Line 246:
''** "... the opinions of Counsellors (and in the case of ENs or regulatory documents, associate members) should be noted..."''TWP 1.7.1 In these cases Counsellors and Associate members may participate and may provide comments with a voting weight of zero.
''** "... the opinions of Counsellors (and in the case of ENs or regulatory documents, associate members) should be noted..."''TWP 1.7.1 In these cases Counsellors and Associate members may participate and may provide comments with a voting weight of zero.


= Annex A: =
Supplementary request related to the Time zone field
<u>Proposed change to the User Interface:</u>
1) Remove the cities from the dropdown


2) Display the current GMT time value
{| class="wikitable"
|+ Table Caption
|-
! Type of Process
! Who can participate
! Type of results
! Notes
|-
| Row 1, Cell 1
| Row 1, Cell 2
| Row 1, Cell 3
| Row 1, Cell 4
|-
| Row 2, Cell 1
| Row 2, Cell 2
| Row 2, Cell 3
| Row 2, Cell 4


[[File:Oct10.png|alt=|none|thumb|→ the user can then easily evaluate the time difference between their location and GMT]]
|}

Latest revision as of 09:54, 12 November 2024

Home

The Decision Support Application is designed to help the ETSI Groups with their decision making processes. It has predefined types of decisions for

  • approving a draft,
  • selecting an option,
  • electing officials
  • ordinary decisions.

Each type has been defined in accordance with the ETSI Rules of  Procedure in terms of who can vote, calculation of results etc.).

Each decision will normally have 3 phases

Phase 1 - Creating (also modifying, deleting or closing a vote

Phase 2 - Voting

Phase 3 - Results

In addition, you may be interested in Validating your voting rights


Voting

How to Vote

a) Select IN PROGRESS from the menu.

b) Select the particular vote from the list. (Green indicates consensus gathering and Blue indicates votes.)


If you find you can't vote it may be because:.

1) There are currently no open votes in which you are allowed to participate.

2) The organization you  represent  does not have voting rights.

3) You are not correctly registered in the Membership List of the appropriate Group in case of vote by correspondence.

c) If you represent more than one organization, you will be able to select the appropriate organization from the list at the top of the screen. You will only be able to vote on behalf of ONE of these Organizations. If you represent more than one organization, but do not have the option to select the organization, or if the list is not complete, please contact the Technical Body Support Team

https://portal.etsi.org/People/Commitee-Support-Staff

d) Make your selection and click on the "Submit" button

You may change your vote until the close of the voting period.

If someone else from your organization has already voted, you will see who has voted and if the vote is not secret, you can also see how they voted.

You may, in exceptional circumstances, change the vote of another representative of your organization. However, it is strongly recommended that you contact the person first. If you change the vote of another person that person will be informed by email of your action.

Voting rights

Validating your voting rights.

CONTENTS:


Who may vote

See https://portal.etsi.org/webapp/tbdecision3/Menu.asp

How to check your rights

You first need a username and password.

For voting by correspondence in a Technical Body, open the TB Membership/Exploder Lists application.

Step 1 check that you have (been) registered to the list.

The right side of the screen shows the email exploders lists to which you are registered. Technical Body Membership lists are highlighted. (You may also subscribe to a list for email only. In this case the exploder list will not be shown on the screen and you will not have voting rights.)

If you don't see the list, follow the instructions for Registering to a Technical Body List below.

Step 2 Check that your voting rights are correct.

Click on the name of the membership list. Search for your name or email address (Use the Browser "search" or "find"  functions). The last column shows your voting rights. If you have "No Voting Rights" check that your Organization and the Organization status is correct. If the organization is not correct or if you think the status is not correct, then email the membership cell at membership@etsi.org .

For voting in an Industry Specification Group, specific rules may apply according to the ISG agreement. To know your voting rights, contact the person supporting the ISG.


Registering to a Technical Body Membership List

Open the TB Membership/Exploder Lists application.

Select the Technical Body from the list on the left side of the page and click to view its email exploder lists.

Tick the list indicated as the Membership list and specify the email address(es) you would like this list to use.

Click the "Add me" button. The list owner will receive a message indicating that you wish to join the list.

Creating/Modifying

Officials (Chair and Vice Chair) and support staff are allowed to manage votes for their Groups: the "Create" and "Modify" options are visible to them.

Modifying a vote configuration is no longer possible after the first vote has been cast. However, Deletion is still possible.

Who can vote? See https://portal.etsi.org/webapp/tbdecision3/Menu.asp


To create a vote, you provide the vote details in two consecutive screens. The first screen displays the elements below. When satisfied with the details entered, click on the "Create" Button, and the second screen will be displayed.

Body

Select the body available to you from the list proposed in the "Technical Body" field. Note that after creation of the procedure, the Body can no longer be modified. However, deletion is still possible.

Category

The following predefined Categories of decision are supported by the application (Details of Categories).

  • Election 1st Ballot
  • Election 2nd Ballot with 2 Candidates
  • Election 2nd Ballot with more than 2 Candidates
  • Election 3rd Ballot
  • Vote on Draft EN
  • Vote on Draft TS, TR, ES, EG, GR or GS
  • Selection of an option
  • Ordinary decision

Once the vote has been created, the Category may not be modified any longer, however deletion is still possible.

The Secret flag determines whether the individual votes and comments will be visible or not.

For several categories this choice is imposed by the application (following ETSI Directives). For others, the Secret flag may be toggled manually.

The outcome (e.g.draft approved/not approved,) and the percentage of votes will always be available on closure of a decision process.

Subject

The Title must clearly identify the decision to be taken (e.g.

  • Approval of DTS/CYBER-0014 (TS 103 486) final draft v0.05 for publication
  • Election of a vice chair-Chairman for ISG NFV Working Group IFA

The Details can add additional information if required. "Before voting, a clear definition of the issues shall be provided by the chair" [ETSI TWP]

Voting Period

The Voting period must be defined.

For a vote by correspondence, the vote will be opened from 00:00:01 GMT on the starting date.

It will close at midnight GMT on the closing date.

For a vote during a meeting, select the number of hours by which the meeting time zone is ahead of or behind GMT (GMT+/-xx:xx)

  • Officials and others who have rights to manage votes, may also close a vote manually at any time before the end date and time specified at the creation time.
  • If the start date is configured in the past, the vote will start immediately after being created.

When satisfied with the details entered, click on the "Create" Button

On the next screen you will find the elements below.

Document Location

The Document Location which may be used to provide a hyperlink to a copy of the draft for approval, the CVs of the candidates etc. It may be a word document, zipped file, HTML page other file type, or a folder. This field is optional and may remain blank.

Candidates

In the case of an election or selection of a technology , the Candidates or options  must be specified. Enter each one, then use the "Add" button to create another. The option to "abstain" will be added automatically.

In the case of an approval of a draft, the options "yes", "no" and "abstain" will be automatically created.

Near the bottom of this second screen is a link to the Membership list of the Group concerned. This is the list of people who have voting rights when it is a vote by Technical Body for a vote by correspondence. If a person is not in the list, or if the last column says "No voting rights" they will not be able to vote for a vote by correspondence. People representing Full and Associate Member Organizations may get voting rights via the TB Membership Lists application.

For vote during a meeting, the list of all Full and Associate members voting weights applies.

For voting rules for TB and ISG, see https://portal.etsi.org/webapp/tbdecision3/Menu.asp

Click on the Accept button when ready.

Vote details

A summary of the details you have entered will be displayed. You can then click on Next to optionally send an email.

Send an email

Templates for email notification to inform the group exploder list will be created in the application. You may access it by clicking on the NOTIFICATIONS menu.

The possible actions on a pre-configured notification email are:

  • Delete
  • Update
  • Send

The "Notifications" menu option provides links to all notifications which have not been deleted or sent.


See also:

Close a vote

Notification

Delete a vote

Notification

When a vote is created or closed, an email template is created. It is addressed to the exploder list for the Group concerned and provides the details including a link to the voting form or results page as appropriate.

You may modify the message providing any additional information required.

You may send it immediately or save it and send it later.

The "Notifications" menu item provides access to all notifications which have not been sent or deleted.

Results

Viewing the Results

CONTENTS

All account holders have access to the results of all decisions. The results can be displayed in three levels of detail.

The outcome (e.g. if a draft was accepted or rejected, if a person was elected) is available to all EOL account holders.

The percentage of votes cast for each option is also available to all EOL account holders. The percentages may also be shown for Full Members and Associate Members. This is available for all decisions.

The third level of detail is the individual votes cast and the comments made. This is only available for consensus gathering and voting on drafts. This is not available for ballots for election. nor for votes where the secret flag has been set (see Vote Creation)

Results dissemination to the mailing list or during the meeting is manual.

Delete

Deleting a vote

This is intended for use, only when the vote has been created in error.

The people who may create a vote process for a Group may also delete them.

Once deleted, a vote cannot be restored. No results are available for a deleted vote.

Choose "Delete" from the menu. Select the vote to be deleted. Click on the "Delete" button.

Categories

Voting004.png


* "... see clause 1.7 of Technical Working Procedures for calculation of voting result in Technical Body. See clauses 1.7, 3.3 and 3.7 for ISGs.


** "... the opinions of Counsellors (and in the case of ENs or regulatory documents, associate members) should be noted..."TWP 1.7.1 In these cases Counsellors and Associate members may participate and may provide comments with a voting weight of zero.


Table Caption
Type of Process Who can participate Type of results Notes
Row 1, Cell 1 Row 1, Cell 2 Row 1, Cell 3 Row 1, Cell 4
Row 2, Cell 1 Row 2, Cell 2 Row 2, Cell 3 Row 2, Cell 4
Retrieved from "https://help.etsi.org/index.php?title=Voting&oldid=3575"